Home > Greenlee Fairmont Hydraulic Tools > Impact Wrenches & Drills >

Greenlee HW1V Adjustable Torque Impact Wrench

Greenlee HW1V Hydraulic Impact Wrench
 
Our Price: $1,585.50



Availability: In Stock
Product Code: HW1V
Qty:

Description
 

This high torque, high speed Greenlee HW1V hydraulic impact wrench has an industry leading torque and speed. With a high strength casting, reduced weight, and widened trigger design, this wrench turns at up to 6,500 rpm and can drill holes through hardened poles in seconds rather than minutes. And they have the torque (500ft.-lb.) to break most rusty pole hardware free.

HW1V hydraulic impacts are equipped with a 7/16 inch hex quick change chuck for use with all major brands of impact bits as well as Greenlee NR1 and NR2 nut runner sockets. They come with a 3 position torque adjustment control and quick change access, to adjust the torque to suit the needs of each specific task. For instance the torque can be reduced to prevent over tightening of new pole hardware.

Features

  • Impact and temperature resistant replaceable polymer grip designed to dissipate heat from the cast handle
  • Weight reduction of 14 percent to that of previous models
  • Improved center of gravity for superior ergonomics
  • Increased service life with the addition of backup rings and larger O-rings
  • Built in hydraulic check valve to eliminate damage from an improperly connected tool
  • Large and strong lifting eye for easy and secure storage
  • Longer and wider trigger provides improved control with insulated gloves
  • Discrete position torque adjustment control with 3 positions and quick change access on the variable torque model, (HW1V)
  • Fast and easy change between open center systems and closed center systems with no disassembly required
  • Higher breaking torque in reverse to ensure you can remove tight bolts
  • Cast motor enclosure that better protects the impact mechanism operation versus competing models with stamped steel enclosure

Specifications

  • Capacity: 7/16 inch hex
  • Drive Size: 1/2 inch when using 49314 adapter
  • Flow Range: 4 - 12 GPM (15 - 46 LPM)
  • Handle Type: Impact and temperature resistant replaceable polymer grip
  • Hydraulic System: Super spool selector for open and closed center systems
  • Includes: 7/16 hex quick change chuck and 49314 heavy duty adapter
  • Operating Pressure: 1000 - 2500 PSI (69 - 170 BAR)
  • Optimum Flow Range: 5 - 8 GPM (19 - 30 LPM)
  • Pressure Port: 9/16-18 SAE O-ring
  • Return Port: 3/4-16 SAE O-ring
  • Torque Rating:
    • Maximum: 500 FT-LB At 8 GPM (677 N-M At 30 LPM)
    • Minimum: 160 FT-LB At 8 GPM (213 N-M At 30 LPM)
  • Weight: 6.6 LB (2.970 KG)
  • Length: 8.2 inch
  • Height: 11 inch
  • Width: 4.2 inch

Parts and Instruction Manual

Cat# HW1V
UPC# 00372
Mat# 52060634



Accessories for this product...
NR1 Nut Runner Greenlee 3/8" Female Quick Coupler Nail Eater Extreme Impact Bit 11/16" Greenlee 3/8" Male Quick Coupler
Our Price: $193.00
Our Price: $55.85
Our Price: $28.60
Our Price: $30.00
Greenlee NR1 Nut Runner Greenlee F020195K Greenlee Nail Eater Extreme Impact Bit Greenlee F020198K
Emerson-Greenlee Non-Conductive Rubber Low Pressure Hose Set Emerson-Greenlee Non Conductive Rubber Low Pressure Hose
Our Price: $190.20
Our Price: $231.35
Emerson-Greenlee Lower Pressure Hydraulic Hose Emerson-Greenlee Hydraulic Hose

Share your knowledge of this product with other customers... Be the first to write a review