This is a Greenlee hydraulic pole tamper with a remote on/off valve and an 8" kidney shaped foot. This tool is typically used by utility crews to backfill dirt around new power poles. Farmers also use this tamper when installing new fence posts. It saves time and your body from using the old hand tamp.

NOTE:

If you are using a tractor or a skid steer as your hydraulic source to run the tamper and the unit does not have a circuit to reduce the pressure and flow then you will have to purchase a flow control device before using the tamper on your equipment. We carry a priority divider in stock here.

Features

Makes quick work of setting poles, asphalt patch, and general construction back fill compacting
Only three moving parts for low maintenance
Kidney shaped foot to tamp around round poles and posts easily
Hose end valve is a reversible on/off valve for open and closed center hydraulic systems

Specifications

System: Open and closed center
Valve Location: End of hose
Length: 60 inch (1,524 mm)
Weight: 23 lb. (10.4 kg)
Width: 4 inch (102 mm)
Flow Range: 4 to 6 gpm (15 to 23 lpm)
Operating Pressure: 1,000 to 2,000 psi (69 to 140 bar)
Pressure Port Thread: 9/16 - 18 SAE O-ring
Return Port Thread: 3/4 - 16 SAE O-ring
Foot Size: 2.5 inch by 8 inch (63 x 203 mm) kidney shaped
Blows Per Minute: 1,160 at 5 gpm (19 lpm)

Parts and Instruction Manual

Cat# H4802
UPC# 42198
Mat# 50421980