This is a Greenlee 5/8" ground rod driver used to install ground rods that stabilize large towers or structures. This hydraulic tool is much easier to use than driving them in with a sledge hammer especially in hard soil conditions.

Features

A deep rod opening and smooth operation ensures that the driver will not jump off of rods.
Light weight allows easy mounting on top of rods.
Can be used with open and closed center hydraulic systems.
Dual guide rods provide excellent control for driving rods straight, and the remote on off valve makes it easy to control the depth of the rod.

Hydraulic System: Open and closed center
Jaw Opening: 5/8 inch (16.0 mm)
Weight: Power unit only 45 lbs (20.5 kg); with Hoses and Control Valve (Included) 53 lbs (24.0 kg)
Length: 25.5 inch (654 mm)
Flow Range: 5 to 8 gpm (19 to 30 lpm)
Blow Energy: 63 ft.-lb. (85 joules)
Blows Frequency: 1740/min. at 8 gpm (30 lpm)
Maximum Input Pressure: 2000 psi (138 bar)
Hose Length: 70 inch (178 cm)
On/Off Valve Pressure Ports: 9/16 - 18 SAE O-ring
On/Off Valve Return Ports: 3/4 - 16 SAE O-ring

Cat# HRD-58
UPC# 11192
Mat# 50111922

Share your knowledge of this product with other customers... Be the first to write a review

	22" Interchangeable Spiral Bullet Head $2,860.00
	Terex RJ2 Corebarrel Block $6.50
	2-1/2 inch hex by 72 inch kelly bar $575.00
	Hex Corebarrel Tooth 1-1/8" $30.35
	Kelly Bar Adapter 5.25" Square Box to a 4" Square Bar $1,920.00
	24" Interchangeable TXC Series Head $1,405.00
	Standalone Core Barrel Extendable Pilot Bit $1,280.00
	Saw Head Assy, No Motor, For AM/HA Saws $328.55
	12" Bullet Tooth Rock Auger with 3" Square Kelly Box $3,330.00