This is a Greenlee RK6040 60 ton single action hydraulic crimping tool. This crimper requires a 10,000 psi (700 bar) single acting hydraulic power source.

Features

• This is an ideal tool for use in substation and transmission line construction.
• Accepts Burndy L dies and Alcoa 6000 Series crimping dies.
• To remove splices, the top of the head easily swivels 90 degrees and then can be lifted from the tool.
• Removing the tool from the stand exposes a lifting eye that is used when the tool must be used above ground level.
• Operates with most 10,000 psi (700 bar) hydraulic power sources.
• Equipped with 3/8 inch male screw type hydraulic coupler.
• Includes steel carrying case with storage space for dies.
• Dies not included.

Specifications

• Crimping Force: 60 Tons (120,000 lbs.) (530 kN) at 10,000 psi (700 bar)
• Height: 17 inch (432 mm)
• Width: 6 inch (153 mm)
• Weight: 45 lb. (20 kg)
• Operating Pressure: 10,000 psi (700 bar)
• Oil Volume Required: .75 pint (312 cc)

Connector Capacity

• Copper Stranded Code Cable: 300 kcmil to 2,000 kcmil
• Aluminum Stranded Code Cable: 250 kcmil to 2,000 kcmil
• Copper Tension Sleeves: 1/0 AWG to 1,000 kcmil
• Aluminum Tension Sleeves: 1/0 AWG to 2,300 kcmil
• ACSR Tension Sleeves: 1/0 AWG to 2,156 (84/19) kcmil
• Copper Aerial Connectors: 4/0 AWG to 2,500 kcmil
• Aluminum Aerial Connectors: 3/0 AWG to 2,500 kcmil

Parts and Instruction Manual

Cat# RK6040
UPC# 10604
Mat# 50106040