This is a Greenlee 1" ground rod driver used to install ground rods that stabilize large towers or structures. This hydraulic tool is much easier to use than driving them in with a sledge hammer especially in hard soil conditions.

Features

A deep rod opening and smooth operation ensures that the driver will not jump off of rods.
Light weight allows easy mounting on top of rods.
Can be used with open and closed center hydraulic systems.
Dual guide rods provide excellent control for driving rods straight, and the remote on off valve makes it easy to control the depth of the rod.

Hydraulic System: Open and closed center
Jaw Opening: 1 inch (25.0 mm)
Weight: Power unit only 45 lbs (20.5 kg); with Hoses and Control Valve (Included) 53 lbs (24.0 kg)
Length: 25.5 inch (654 mm)
Flow Range: 5 to 8 gpm (19 to 30 lpm)
Blow Energy: 63 ft.-lb. (85 joules)
Blows Frequency: 1740/min. at 8 gpm (30 lpm)
Maximum Input Pressure: 2000 psi (138 bar)
Hose Length: 70 inch (178 cm)
On/Off Valve Pressure Ports: 9/16 - 18 SAE O-ring
On/Off Valve Return Ports: 3/4 - 16 SAE O-ring

Cat# HRD-1
UPC# 11193
Mat# 50111930

Share your knowledge of this product with other customers... Be the first to write a review

	Kelly Bar Adapter 3" Square Box to a 2.5" Square Bar $1,010.00
	Terex Bearing Cone- Texoma 330 $334.56
	2 inch hex by 72 inch kelly bar $960.00
	42" Digger Derrick Dirt Auger $3,975.00
	12" Digger Derrick Dirt Auger $1,235.00
	30" Digger Derrick Bullet Tooth Rock Auger $4,475.00
	Greenlee Pruner Bushing $29.10
	Link Pin for Greenlee Orchard Pruner (.249X.476) $14.25
	Nylite Spool, Shield, & Shackle Assembly - Size 4- Orange $236.50