THIS IS A STANLEY HYDRAUIC POLE TAMPER WITH A REMOVE ON/OFF VALVE AND AN KIDNEY SHAPED FOOT. THIS TOOL IS TYPICALLY USED BY UTILITY CREWS TO BACKFILL DIRT AROUND THE NOW POWER POLES. FARMERS ALSO USE THIS TAMPER WHEN INSTALLING NEW FENCE POSTS. IT SAVES TIME AND YOUR BODY FROM USING THE OLD HAND TAMP.
If you are using a tractor or a skid steer as your hydraulic source to run the tamper and the unit does not have a circuit to reduce the pressure and flow then you will have to purchase a flow control device before using the tamper on your equipment. We carry a priority divider in stock here.
- Makes quick work of setting poles, asphalt patch, and general construction back fill compacting
- Only two moving parts for low maintenance
- Kidney shaped foot to tamp around round poles and posts easily
- Hose end valve is a reversible on/off valve for open and closed center hydraulic systems.
Weight: 39 LBS
Flow Range: 3-9 GPM 11-34LPM
Working Pressure: 1,000-2,000 PSI
Full Relief Setting: 2,250/ 155 Bar
1,600 Blows Per Minute 2-1/2" Stroke
Connections: -8SAE Port
Valve: In Line
Will need the following items for a complete setup.