This high torque, high speed Greenlee HW1V hydraulic impact wrench has an industry leading torque and speed. With a high strength casting, reduced weight, and widened trigger design, this wrench turns at up to 6,500 rpm and can drill holes through hardened poles in seconds rather than minutes. And they have the torque (500ft.-lb.) to break most rusty pole hardware free.

HW1V hydraulic impacts are equipped with a 7/16 inch hex quick change chuck for use with all major brands of impact bits as well as Greenlee NR1 and NR2 nut runner sockets. They come with a 3 position torque adjustment control and quick change access, to adjust the torque to suit the needs of each specific task. For instance the torque can be reduced to prevent over tightening of new pole hardware.

Features

Impact and temperature resistant replaceable polymer grip designed to dissipate heat from the cast handle
Weight reduction of 14 percent to that of previous models
Improved center of gravity for superior ergonomics
Increased service life with the addition of backup rings and larger O-rings
Built in hydraulic check valve to eliminate damage from an improperly connected tool
Large and strong lifting eye for easy and secure storage
Longer and wider trigger provides improved control with insulated gloves
Discrete position torque adjustment control with 3 positions and quick change access on the variable torque model, (HW1V)
Fast and easy change between open center systems and closed center systems with no disassembly required
Higher breaking torque in reverse to ensure you can remove tight bolts
Cast motor enclosure that better protects the impact mechanism operation versus competing models with stamped steel enclosure

Specifications

Capacity: 7/16 inch hex
Drive Size: 1/2 inch when using 49314 adapter
Flow Range: 4 - 12 GPM (15 - 46 LPM)
Handle Type: Impact and temperature resistant replaceable polymer grip
Hydraulic System: Super spool selector for open and closed center systems
Includes: 7/16 hex quick change chuck and 49314 heavy duty adapter
Operating Pressure: 1000 - 2500 PSI (69 - 170 BAR)
Optimum Flow Range: 5 - 8 GPM (19 - 30 LPM)
Pressure Port: 9/16-18 SAE O-ring
Return Port: 3/4-16 SAE O-ring
Torque Rating:
- Maximum: 500 FT-LB At 8 GPM (677 N-M At 30 LPM)
- Minimum: 160 FT-LB At 8 GPM (213 N-M At 30 LPM)
Weight: 6.6 LB (2.970 KG)
Length: 8.2 inch
Height: 11 inch
Width: 4.2 inch

Parts and Instruction Manual

Cat# HW1V
UPC# 00372
Mat# 52060634